Gold Member Since 2016
Audited Supplier
Xuchang Huarui Machinery Co., Ltd.

Tire Shredder, Tire Crusher for Granule, Rubber Granule Machine manufacturer / supplier in China, offering Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant, New Type Automatic Coil Nail Making Machine / Coil Nail Collator, High Speed Doube Cap Nail Making Machine/Double-Headed Nail Making Machine and so on.

(/ )

Supplier Homepage Product Tyre recycling machine Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant

Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant

FOB Price: US $30,000-110,000 / Set
Min. Order: 1 Set
Min. Order FOB Price
1 Set US $30,000-110,000/ Set
Get Latest Price
Production Capacity: 300 Sets/Month
Transport Package: Wooden Case or as Your Requiremnets
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: XKP350/XKP400/XKP450/XKP560/XKP560L
  • Service Life: ≥15 Years
  • Voltage: 380V
  • Power(W: 30-132 Kw
  • Roll Ratio: 1:2.5
  • Diameter of Roll: 400-560mm
  • Motor Revolution Speed: 760-980 R/Min
  • Function: Make Waste Tires Into Rubber Powder
  • Specification: Tire recycling machine
  • HS Code: 84778560
  • Warranty: 2 Years
  • Certification: CE, ISO
  • Type: Tire Machine
  • Weight: 15-23tons
  • Front Roll Liner Speed: 34.5-44 M/Min
  • Max Roller Spacing: 10 mm
  • Raw Material: Waste Tires
  • Trademark: Huarui
  • Origin: China(Mainland)
Product Description
Tyre /rubber recycling machine shredded tires waste tyre recycling plant 
 
Product Description
Waste tires-circle cutting-strip cutting-block cutting-grind into powder-magnetic separating-separation-packing-put in storage.
Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant

Tire recycling machine with auxillary equipment:

1. Tire ring cutting machine

Tire ring cutting machine is an alone accessory machine, it puts the tire which is greater than 650 type (both nylon and steel wire) flat on the machine, locking tire inside opening through up and down locking system, then putting alloy tools to target to the place of disintegration of tire to cut off the mouth and nation of tire, finished in 3 minutes. The power is 4kw; revolting speech is 40r/min, Shape dimension: 1.8m*1.3m*1.6m.
Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant

2. Tire strip cutting machine

Tire strip cutting machine make use of two round special cutting tools to combination running cutting. It can cut the tire of circle cutting into 3-8mm wide strip, to use for dicer cutting. The material of this machine's knife disk is special alloy structural steel (scientific name: Nine-chrome-silicon), diameter of knife disk isΦ390mm, hardness is 58-62GrS, more durable. With the hand grinding wheel cast when not sharp, power is 4kw, revolting speech is 45r/min, shape dimension: 1.3m*0.8m*1.65m.

Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant

3. Tire block cutting machine

Tire block cutting machine is prepared for the crush of host machine, Not only it makes the cutting strip-type waste rubber cut into about 3*8cm small pieces, but also can enter into host machine again through mutual use between sword and fixed knife, convenient to feed, high output and won't damage roller easily, power is 5.5kw, revolting speech is 380r/min,shape dimension: 1m*0.8m*1.4m. To pay attention to the space between sword knife and fixed knife when the machine is in operation, best to keep at around 0.1mm, so that the steel wire can be cut off.

Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant

4. Steel wire separator

The main working part of this machine is two relative rotary roll shafts with the same speed. When tire circle cut into the middle of two rollers, it will be extruded by roll shaft, at the same time, be squeezed, Sheared and tear by the two relative rotary rollers. And finally complete the separation of the steel wheel by many times.

Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant
5. Crusher machine
Tire Shredder/Rubber Crusher for Granule/ Tires Waste Tyre Recycling Plant
Main Specification
 
Main Specification
 
Model No.
XKP-350
XKP-400
XKP-450
XKP-560
XKP-560L
Diameter of front roll
300 mm (groove)
400 mm (groove)
450 mm (groove)
560 mm (groove)
560 mm (groove)
Diameter of back roll
300 mm (groove)
400 mm (groove)
450 mm (groove)
510 mm (groove)
560 mm (groove)
Drum working length
500mm
600mm
760mm
800mm
1000mm
Front roll liner speed
26.2m/min
34.5 m/min
38.0 m/min
40.6m/min
44m/min
Roll ratio
1:2.5
1:2.5
1:2.5
1:2.5
1:2.5
Max roller spacing
10mm
10 mm
10 mm
10 mm
10mm
Motor power
30KW/37KW
45KW/55KW
55KW /75KW
75KW/90KW
110 KW/132KW
Weight
6T
8.5 T
11T
17.5T
21T
L*W*H
3.5*1.6*1.5m
4.3*1.8*1.6m
4.6*2.0*1.65m
5.3*2.0*1.7m
5.6*2.0*1.7m

Application
1. Used for manufacturing reclaimed rubber, instead of partial natural rubber.

2. Used for color elastic floor tile.

3. Used for manufacture waterproofing materials, waterproofing paint, waterproof and sealed material, etc.

4. Used for High-grade highway Caulking compounds.

5. Used for railway trail adding.

6. Used for modified asphalt.

7. Used for modified plastics.

8. Used to build plastic sports venues, runway, artificial turf.

9. Used for oilfield plugging solid wall.

10. Used for manufacturing rubber soles.


Our service

* Inquiry and consulting support. 

* View our Factory.

* Training how to instal the machine, training how to use the machine. 

* Engineers available to service machinery overseas.
 

Send your message to this supplier
Avatar
Miss bella
*From:
To: Miss bella
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now