Tire Recycling Plant for Rubber Powder

• Warranty: 2 Years
• Service Life: ≥15 Years
• Certification: CE, ISO
• Voltage: as Requested
• Structure: Horizontal
• Name: Xkp350/400/450/560 Tire Recycling Machine
• Model NO.: XKP350/400/450/560/560L tire recycling plant
• Power(W): According to The Machine
• Dimension(L*W*H): According to The Machine
• Weight: According to The Model of The Machine
• Color: Optional (Blue/Green and So on)
• Function: Make Waste Tires and Rubber Into Rubber Crumb and
• Raw Material: Waste Tires
• Transport Package: Sea Worth or as Your Requirement
• Specification: one 40GP container
• Trademark: Huarui tire recycling machine
• Origin: Henan Xuchang
• Production Capacity: 100 Set/Sets Per Month

Product Description

Tire recycling plant for rubber powder 

Waste tire recycling plant rubber powder machine
it has following outstanding advantages:
No pollution: Separate the fiber, wire and rubber completely under normal temperature by physical methods, zero-emission of waste gas, water and feigh.
Low consumption: Lowest energy consumption and labor cost. Used Tyre Recycling Plant.
High capability: Capable of disposing the waste tires which the diameter is less than 1250 mm into 5-40 mesh crumb rubber.
 

Our whole waste tire recycling plant rubber powder production line is used to make waste tires and rubber into rubber crumb and rubber powder.
 

1.Process flow:
Waste tire-tire circle cutter -tire strip cutter-tire slice cutter-XKP400/450/560--magnetic separator-fiber separator--finished products (rubber powder).


2. This production line including the below:

Name of equipment		Quantity (set)	Instruction
Host equipment	Rubber crusher	1	Model No.: XKP350/XKP400/XKP450/XKP560/XKP560L
Auxiliary machine	Tire Circle cutter	1	To cut open the joint of the tire's side and top
	Tire Strip cutter	1	Reserve the wire hoop, cut the ties without sidewalls into strips
	Tire Slicing cutter	1	Cut the strips into chunks about 3.5 cubic centimeter
	Main vibrating screen	1	Separate the rubber powder for the first time (5-10 mesh)
	Conveyor/feeder	1	To transfer the rubber powder that couldn't meet the mesh count's requirement back to host machine to crush again
	Fiber separator	1	Separate the finished product of rubber powder (10-40 mesh)
	Magnetic separator	2	Extract and separate mental wire from the rubber powder
Remark		The above equipments constitute the complete set of scrap tire rubber powder machine.
Steel wire separator		1	Special for extract wires in the tire's circle

 

(1) Tire circle cutter
The circle cutting machine is an alone accessory machine, it puts the tire which is greater than 650 type (both nylon and steel wire) flat on the machine, locking tire inside opening through up and down locking system, then putting alloy tools to target to the place of disintegration of tire to cut off the mouth and nation of tire, finished in 3 minutes. The power is 4kw; revolting speech is 40r/min, Shape dimension:1.8m*1.3m*1.6m.
 

Name of product	Motor power	Weight	Capacity	Specification	Overall dimension
Tire circle cutter	4.75KW	650 kg	40pcs/h	650- 1250 mm (Both reinforced tire and nylon tires)	1.8m*1.3m*1.6m

(2) Tire Strip cutter

 Tire strip cutting machine make use of two round special cutting tools to combination running cutting. It can cut the tire of circle cutting into 3-8mm wide strip, to use for dicer cutting. The material of this machine's knife disk is special alloy structural steel (scientific name: Nine-chrome-silicon), diameter of knife disk isΦ390mm, hardness is 58-62GrS, more durable. With the hand grinding wheel cast when not sharp, power is 4kw, revolting speech is 45r/min, shape dimension: 1.3m*0.8m*1.65m.
 

Name of product	Motor power	Work range	Processing speed	Demission	Weight
Tire strip cutting machine	5.5KW	tire of 650-1250 mm	20-35 strips/h	1.3m*0.8m*1.65m	850 kg

 

(3) Tire Slice cutter

Tire slice cutting machine: the machine is prepared for the crush of host machine, it makes the cutting strip-type waste rubber cut into about 3*8cm small pieces, which can enter into host machine easily, high output and won't damage roller.

Name of product	Motor power	Weight	Designed yield	Dicer specification
Tire slice cutting machine	5.5 KW	800 kg	0.8 T/h	3*5*8 cm

 


(4)Steel wire Separator 

(5)Tire crusher


3.Our CE certification of tire recycling plant


4.Technical parameter:

Model No.	XKP-400	XKP-450	XKP-560	XKP-560L
Diameter of front roll	400 mm (groove)	450 mm (groove)	560 mm (groove)	560 mm (groove)
Diameter of back roll	400 mm (groove)	450 mm (groove)	510 mm (groove)	560 mm (groove)
Drum working length	600mm	760mm	800mm	1000mm
Front roll liner speed	34.5 m/min	38.0 m/min	40.6m/min	44m/min
Roll ratio	1:2.5	1:2.5	1:2.5	1:2.5
Max roller spacing	10 mm	10 mm	10 mm	10mm
Motor power	45KW/55KW	75KW/90KW	90KW/110 KW	132KW/160KW
Weight	8.5 T	11T	17.5T	23T
L*W*H	4.3*1.8*1.6m	4.6*2.0*1.65m	5.3*2.0*1.7m	5.6*2.0*1.7m