Waste Tire Crusher/Used Tyre Recycling Machine/Rubber Powder Making Machine /Tire Recycling Machine

• Warranty: 2 Years
• Service Life: ≥15 Years
• Certification: CE
• Voltage: 380V
• Structure: Horizontal
• Name: Tyre Cutting Machine
• Model NO.: XKP350, XKP400, XKP450, XKP560,
• After Sales Service: Engineers Available to Service Machinery Overseas
• Raw Mateial: Waste Tyre/Rubber Tyre
• Power: 4kw
• Capacity: 40PCS/H
• Work Range: 650-1250mm
• Dimension: 1800*1300*1600mm
• Transport Package: Export Wooden Case
• Specification: 1800*1300*1600mm
• Trademark: Huarui
• Origin: China
• Production Capacity: 200sets/Month

Product Description

  Waste tire cracker mill/used tyre recycling machine/rubber crusher mill machine

1. Tire Circle Cutting Machine is an alone accessory machine, it puts the tire which is greater than 650 type (both nylon and steel wire) flat on the machine, locking tire inside opening through up and down locking system, then putting alloy tools to target to the place of disintegration of tire to cut off the mouth and nation of tire, finished in 3 minutes

Name of Product	Motor Power	Weight	Capacity	Specification	Overall Dimension
Tire Circle Cutter	4KW	650KG	40pcs/h (steel and nylon wire)	650-1250mm	1.8m*1.3m*1.6m

2.Steel Wire Separator is used to separate the steel wire from tire ring. The main working part of this machine is two relative rotary roll shafts with the same speed. When tire circle cut into the middle of two rollers, it will be extruded by roll shaft, at the same time, be squeezed, Sheared and tear by the two relative rotary rollers. And finally complete the separation of the steel wheel by many times.

Name of Product	Motor Power	Weight	Capacity	Overall Dimension
Steel Wire Separator	11KW	1300KG	100pcs/h	1.2m*1.4m*1.4m

3. Tire Strip Cutting Machine make use of two round special cutting tools to combination running cutting. It can cut the tire of circle cutting into 3-5cm wide strip, to use for dicer cutting. The material of this machine's knife disk is special alloy structural steel (scientific name: Nine-chrome-silicon), diameter of knife disk isΦ390mm, hardness is 58-62GrS, more durable. With the hand grinding wheel cast when not sharp, power is 4kw, revolting speech is 45r/min, shape dimension: 1.3m*0.8m*1.65m. 

Name of Product	Motor Power	Weight	Capacity	Strip Specification	Overall Dimension
Tire Strip Cutter	4KW	850KG	2.5T/h	50*80mm	1.3m*0.8m*1.65m

4. Tire Block Cutting Machine is prepared for the crush of host machine, Not only it makes the cutting strip-type waste rubber cut into about 3*5cm small pieces, but also can enter into host machine again through mutual use between sword and fixed knife, convenient to feed, high output and won't damage roller easily, power is 5.5kw, revolting speech is 380r/min,shape dimension: 1m*0.8m*1.4m. To pay attention to the space between sword knife and fixed knife when the machine is in operation, best to keep at around 0.1mm, so that the steel wire can be cut off.

Name of Product	Motor Power	Weight	Capacity	Dicer Specification	Overall Dimension
Tire Slice Cutter	5.5KW	800KG	0.8T/h	30*50*80mm	1m*0.8m*1.4m

5.Tire Crusher 

Model No.	XKP-350	XKP-400	XKP-450	XKP-560	XKP-560L
Diameter of front roll	300 mm (groove)	400 mm (groove)	450 mm (groove)	560 mm (groove)	560 mm (groove)
Diameter of back roll	300 mm (groove)	400 mm (groove)	450 mm (groove)	510 mm (groove)	560 mm (groove)
Drum working length	500mm	600mm	760mm	800mm	1000mm
Front roll liner speed	26.2m/min	34.5 m/min	38.0 m/min	40.6m/min	44m/min
Roll ratio	1:2.5	1:2.5	1:2.5	1:2.5	1:2.5
Max roller spacing	10mm	10 mm	10 mm	10 mm	10mm
Motor power	30KW/37KW	45KW/55KW	75KW /90KW	90KW/110KW	132KW/160KW
Weight	6T	8.5 T	11T	17.5T	21T
L*W*H	3.5*1.6*1.5m	4.3*1.8*1.6m	4.6*2.0*1.65m	5.3*2.0*1.7m	5.6*2.0*1.7m
Tips: Both rollers are grooved which can improve the output. Roller material is Alloy 5Cr6MnMo. There are 8 pieces bearing inside the machine , all rolling bearing

6.Other Auxiliary equipment:

7.Shipping and Packaging


8.Clients Visiting



Welcome to contact us for more details: