| Customization: | Available |
|---|---|
| After-sales Service: | Provide |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
I. Function and characteristics:
The production line is suitable for light-hardening, thin-layer carburizing and other heat treatment of ferrous metal parts in light industry, textile, hardware tools, bearings, chains, standard parts, self-tapping screws and other industries under the control of controlled atmosphere. The treated parts have the advantages of bright surface, no decarburization, uniform hardness and no deformation. The production line has the characteristics of easy adjustment of process parameters, pollution-free, remarkable energy saving and high productivity.
II. The total installed power of the whole line is about 145kw (including transmission), the production capacity ,carburization is about 85kg/h, and the quenching is about 160kg/h.
III. the process: manual feeding → heating and heat preservation → oil quenching → lifting → cleaning → tempering
IV. Production line equipment
1. RCW-75-9 continuous mesh belt quenching furnace:1set
2, quenching tank (including hoist, circulating cooler):1set
3, soaking spray cleaning machine:1set
4, RCW-45-6 continuous mesh belt tempering furnace:1set
5, electronic control system, two sets
V. Specific technologies and parameters of each device:
1. Continuous mesh belt furnace:
1.1, heating power: 75kw
1.2, rated temperature: 950 ° C
1.3, voltage: 380V
1.4, frequency: 50Hz
1.5, phase number: 3 phase 4 line
1.6, heating zone size: 3700 × 300 × 80mm
1.7, the number of heating zones: divided into 4 zones, can be individually temperature controlled
1.8, furnace temperature uniformity ± 5 ° C
1.9 empty furnace heating time ≤ 3-3.5h
1.10, muffle material: Sweden imported 310S (Cr25Ni20), thickness of 8mm compression molding
1.11, mesh belt material: Japan imported 314, herringbone shape, the effective height of the flange is 20mm
1.12. Heating element material: high temperature Shougang Group wire (0Cr21A16NB)
1.13, mesh belt transmission: adopts frequency conversion motor, and equipped with inverter adjustment speed
1.14, protective atmosphere in the furnace: direct infusion of methanol and ethanol
1.15, thermal insulation material: thermal insulation material selected from Shandong Luyang fiber cotton blanket
1.16, the furnace side wall is made of high temperature mullite brick masonry
1.17. The bottom of the furnace is made of fixed-type refractory high-aluminum brick.
1.18. The muffle and the bottom setting brick are separated by high temperature silicon carbide board, which can effectively protect the life of the muffle and have good heat uniformity.
2. Quenching oil tank:
2.1, the effective volume of the oil tank bigger than 6 cubic CBM.
2.2. The oil tank is provided with a tubular cooling system and an explosion-proof oil pump and an oil filter device.
2.3, using variable frequency speed control motor.
2.4, oil tank and lifting (hoister) are made of low carbon steel, thickness 4mm welding.
2.5. The mesh belt of hoister is made of galvanized iron wire, with a retaining piece, and a lifting plate and chain are installed in the middle to drive.
2.6. Equipped with oil curtain circulation device and powerful blast air blowing system, it can effectively return the quenching oil on the workpiece to the oil pool.
2.7, outer dimensions of the oil pool: 3 m x 1.5 m x 1.6 m (length x width x height)
3, mesh belt cleaning machine:
3.1, cleaning process: automatic feeding → spray cleaning → blast drying
3.2, the washing machine is a rectangular structure, the bottom is a sink, and spray through the pressure of circulating pump.
3.3. The mesh belt of the cleaning machine is made of stainless steel wire, and the lifting plate and chain are driven in the middle.
3.4, the workpiece's dwell time in the washing machine using frequency control motor adjustment.
3.5. The heating liquid is heated by heating tube (about 15KW).
3.6. It is equipped with a powerful blast drying system and oil-water separation device.
3.7, the size of the pool: 3000x1500x1600mm (length x width x height)
4. Continuous mesh belt tempering furnace:
4.1, heating power: 45kw
4.2, rated temperature: 650 ° C
4.3. Effective heating zone size: 5000×500×100mm (length x width x height)
4.4, the workpiece's dwell time in the furnace is using frequency control motor adjustment, equipped with inverter adjustment speed
4.5, number of heating zones: 2 zones temperature control
4.6, heating form: using hot air circulation, 2 sets of fans
4.7. Heating element: using iron chrome aluminum (0Cr25A15) produced in Shanghai
4.8, mesh belt: stainless steel 304 stainless steel mesh folding (herringbone)
4.9. Mesh belt bracket and air deflector: 321 (lCr18Ni9Ti), bracket is 6mm, wind plate is 3mm
4.10, insulation materials and refractory bricks: insulation materials are aluminum silicate fiber and refractory brick
4.11. The tempering furnace mesh belt drive is equipped with three large pressure rollers, which can effectively control the deviation behavior of the mesh belt and make the mesh belt have a longer service life.
4. Electronic control system:
4.1, temperature control instrument: the imported SHIMADEN SR3 intelligent temperature controller, with PID automatic temperature control, and with an over temperature alarm system for quenching, tempering temperature control.
4.2, quenching furnace: using imported SHIMADEN SR3 intelligent temperature control.
4.3. Quenching oil tank: It is monitored by Zhejiang CHINT intelligent temperature controller.
4.4. The tempering furnace adopts imported SHIMADEN SR3 intelligent temperature control
4.5. The reliability of the electric circuit, the power part and the heating part are respectively protected by double, and the electric cabinet is equipped with a cooling fan.
4.6. Each individual temperature control zone is equipped with ammeter and temperature display and temperature setting.
More about us:
1. Our factory has been specialized in manufacturing screw bolt and nut making machines, furnaces and galvanizing line for nearly 30 years.
2. Our machines can make many sizes and kinds screw and bolts
3.Our machines are of high quality.
4.We provide 2 years warranties to all of our machines. We provide life long after sale services.
5.Our engineer is available to your country to install the machine and train your workers
){kind=link}