| Warranty: | 2 Years |
|---|---|
| Service Life: | ≥15 Years |
| Certification: | CE |
| Voltage: | 380V or Customize It as Your Requirement |
| Name: | Xkp 350/400/450/560/560L Tire Recycle Plant |
| Power(W): | According to The Machine |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
1.Process flow:
The Working Process: Draw steel wire from the tire ring by Tire wire drawing machine-if the diameter of tire is bigger than 900mm, can choose to use tire cutting machine to cut the tire to several pieces--- put the small tires or pieces into tire shredder to make tire blocks-put the tire blocks to the tire crusher to make rubber powder-finished rubber powder.
2. This production line including the below:
|
Name of equipment |
Quantity |
Instruction |
|
|
Host equipment |
Rubber crusher |
1 |
Model No.: XKP400/XKP450/XKP560/XKP560L/XKP660 |
|
Auxiliary machine |
Tire Wire drawing machine |
1 |
To remove the steel wire from the whole tires |
|
Tire cutting machine |
1 |
Cutting the whole tire into 3 pieces or several pieces |
|
|
Tire shredder |
1 |
Shredder the whole tires or tire pieces into 50x50mm rubber blocks |
|
|
Main vibrating screen |
1 |
Separate the rubber powder for the first time (5-10 mesh) |
|
|
Conveyor/feeder |
1 |
To transfer the rubber powder that couldn't meet the mesh count's requirement back to host machine to crush again |
|
|
Fiber separator |
1 |
Separate the finished product of rubber powder (10-40 mesh) |
|
|
Magnetic separator |
2 |
Extract and separate mental wire from the rubber powder |
|
|
Remark |
The above equipments constitute the complete set of scrap tire rubber powder machine. |
||
(1) Tire wire drawing machine
| --1. TD-1200Tire wire drawing machine | |
| Name | Technical parameter |
| Feed size of tire(mm) | ≤φ1300 |
| Capacity(tires/h) | 30-40 |
| Power(KW) | 11 |
| Overall dimensions(m) | 4.1*0.9*1.7 |
| Equipment weight (T) | 1.8 |
| Application: used to draw out the steel loops from the tire bead. | |
| --2. TC-1200Tire cutting machine | |
| Name | Technical parameter |
| Feed size of tire(mm) | ≤φ1300 |
| Capacity(tires/h) | 30-40 |
| Power(KW) | 5.5/7.5 |
| Overall dimensions(m) | 1.8*0.9*1.85 |
| Equipment weight (T) | 1.5 |
| Application: used to cut big tires to tree pieces or smaller pieces. | |
| Model No. | TS-800 | TS-1000 | TS-1200 | TS-1500 |
| Output(T/h) | about2ton | 3-4ton | 4-6ton | About 10ton/hour |
| Feed size of tire(mm) | ≤φ900 | ≤φ1000 | ≤φ1250 | ≤φ1500mm |
| Output size(mm) | ≤50*50 | ≤50*50 | ≤50*50 | ≤50*50mm |
| Power(KW) | 22/30*2+4+1.5 | 45*2+4+1.5 | 75*2+5.5+1.5 | 110kw*2+9kw |
| Speed(r/min) | 15 | 14 | 14 | 18r/min |
| Equipment weight | 9T | 12T | 15T | 20T |
| Application: is used for cutting whole tire to 50*50mm rubber block. (Including 2 conveyor belts) | ||||
| Model No. | XKP-400 | XKP-450 | XKP-560 | XKP-560L | XKP-660 |
| Diameter of front roll | 400 mm (groove) | 450 mm (groove) | 560 mm (groove) | 560 mm (groove) | 660 mm (groove) |
| Diameter of back roll | 400 mm (groove) | 450 mm (groove) | 510 mm (groove) | 560 mm (groove) | 610 mm (groove) |
| Drum working length | 600mm | 760mm | 800mm | 1000mm | 1200mm |
| Front roll liner speed | 34.5 m/min | 38.0 m/min | 40.6m/min | 44m/min | 58m/min |
| Roll ratio | 1:2.5 | 1:2.5 | 1:2.5 | 1:2.5 | 1:2.5 |
| Max roller spacing | 10 mm | 10 mm | 10 mm | 10mm | 10mm |
| Motor power | 45KW/55KW | 75KW /90KW | 90KW/110KW | 132KW/160KW | 200KW |
| Weight | 8.5 T | 11T | 17.5T | 21T | 32T |
| L*W*H | 4.3*1.8*1.6m | 4.6*2.0*1.65m | 5.3*2.0*1.7m | 5.6*2.0*1.7m | 6.5*2.3*2m |
| Tips: Both rollers are grooved which can improve the output. Roller material is Alloy 5Cr6MnMo. There are 8 pieces bearing inside the machine , all rolling bearing. |
|||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}