| Customization: | Available |
|---|---|
| Usage: | Industrial |
| Name: | Xkp350/400/450/560 Tire Recycling Machine |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2. Process flow:
Waste tire-tire circle cutter -tire strip cutter-tire slice cutter-XKP400/450/560--magnetic separator-fiber separator--finished products (rubber powder).
3. This production line including the below:
|
Name of equipment |
Quantity |
Instruction |
|
|
Host equipment |
Rubber crusher |
1 |
Model No.: XKP350/XKP400/XKP450/XKP560/XKP560L/XKP660 |
|
Auxiliary machine |
Tire Circle cutter |
1 |
To cut open the joint of the tire's side and top |
|
Tire Strip cutter |
1 |
Reserve the wire hoop, cut the ties without sidewalls into strips |
|
|
Tire Slicing cutter |
1 |
Cut the strips into chunks about 3.5 cubic centimeter |
|
|
Main vibrating screen |
1 |
Separate the rubber powder for the first time (5-10 mesh) |
|
|
Conveyor/feeder |
1 |
To transfer the rubber powder that couldn't meet the mesh count's requirement back to host machine to crush again |
|
|
Fiber separator |
1 |
Separate the finished product of rubber powder (10-40 mesh) |
|
|
Magnetic separator |
2 |
Extract and separate mental wire from the rubber powder |
|
|
Remark |
The above equipments constitute the complete set of scrap tire rubber powder machine. |
||
|
Steel wire separator |
1 |
Special for extract wires in the tire's circle |
|
(1) Tire circle cutter
The circle cutting machine is an alone accessory machine, it puts the tire which is greater than 650 type (both nylon and steel wire) flat on the machine, locking tire inside opening through up and down locking system, then putting alloy tools to target to the place of disintegration of tire to cut off the mouth and nation of tire, finished in 3 minutes. The power is 4kw; revolting speech is 40r/min, Shape dimension:1.8m*1.3m*1.6m.
|
Name of product |
Motor power |
Weight |
Capacity |
Specification |
Overall dimension |
|
Tire circle cutter |
4.75KW |
650 kg |
40pcs/h |
650- 1250 mm (Both reinforced tire and nylon tires) |
1.8m*1.3m*1.6m |
(2) Tire Strip cutter
Tire strip cutting machine make use of two round special cutting tools to combination running cutting. It can cut the tire of circle cutting into 3-8mm wide strip, to use for dicer cutting. The material of this machine's knife disk is special alloy structural steel (scientific name: Nine-chrome-silicon), diameter of knife disk isΦ390mm, hardness is 58-62GrS, more durable. With the hand grinding wheel cast when not sharp, power is 4kw, revolting speech is 45r/min, shape dimension: 1.3m*0.8m*1.65m.
|
Name of product |
Motor power |
Work range |
Processing speed |
Demission |
Weight |
|
Tire strip cutting machine |
5.5KW |
tire of 650-1250 mm |
20-35 strips/h |
1.3m*0.8m*1.65m |
850 kg |
(3) Tire Slice cutter
Tire slice cutting machine: the machine is prepared for the crush of host machine, it makes the cutting strip-type waste rubber cut into about 3*8cm small pieces, which can enter into host machine easily, high output and won't damage roller.
|
Name of product |
Motor power |
Weight |
Designed yield |
Dicer specification |
|
Tire slice cutting machine |
5.5KW |
800 kg |
0.8 T/h |
3*5*8 cm |
){kind=link}