| Customization: | Available |
|---|---|
| After-sales Service: | 24 Months |
| Warranty: | 24 Months |
|
Still deciding? Get samples of US$ 10000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Function: The furnace is mainly used for quenching, tempering, annealing, and other heat treatment of bicycle parts, sewing machine parts, standard parts, steel ball bearings, rollers, nails, screws and other small parts.
The furnace has the characteristics such as: good uniformity of furnace temperature, simple operation, simple maintenance, low energy consumption and energy saving.
| Model No. | RGR30-9 | RGR45-9 | RGR60-9 |
| Rated power | 30KW | 45KW | 60KW |
| Rated voltage | 380V/3phases | 380V/3phases | 380V/3phases |
| Rated temperature | 950°C (controlled) | 950°C (controlled) | 950°C (controlled) |
| Instrument temperature control accuracy | ±1ºC | ±1ºC | ±1ºC |
| Temperature control partition | 1 | 1 | 1 |
| control mode | Pid automatic mobilization, solid state relay | Pid automatic mobilization, solid state relay | Pid automatic mobilization, solid state relay |
| heating element | Helical resistance wire ocr21A16Nb | Helical resistance wire ocr21A16Nb | Helical resistance wire ocr21A16Nb |
| Furnace pipe material | 8mm 310S stainless steel(2520) | 10mm 310S stainless steel(2520) | 10mm 310S stainless steel(2520) |
| Heating element connection | Y | Y | Y |
| Furnace tank size | Φ300×620mm | Φ520×680mm | Φ600×750mm |
| Heating area | 1 | 1 | 1 |
| Discharging way | axial discharge | axial discharge | axial discharge |
| Cooling mode | natural cooling | natural cooling | natural cooling |
| furnace tank material | 310S heat-resistant stainless steel | 310S heat-resistant stainless steel | 310S heat-resistant stainless steel |
| Overall dimensions | φ1850*2000 | φ1850*2000 | Φ2300*2400 |
| Capacity | 80~90kg/furnace | 120~130kg/furnace | About 180kg/furnace |
| Weight of the furnace | 1.8ton | 2.5ton | 3.0ton |
Function: The furnace is mainly used for tempering metal workpieces, nails, screws and other small parts.
The furnace has the characteristics such as: good uniformity of furnace temperature, simple operation, simple maintenance, low energy consumption and energy saving.
| Model No. | RJ2R-36-6 | |
| Working Size | 500x600mm (diameter x height) | |
| Rated Power | 36KW | |
| Maximum temperature | 700ºC | |
| Temperature control area | 1 | |
| Temperature control Accuracy | ±1ºC | |
| Uniformity of furnace temperature | ±3-5ºC | |
| Temperature control components | Solid-State relays, PID automatic transfer | |
| Heating time of Empty Furnace | ≤0.5h | |
| Temperature control instrument: | Japan Electric Intelligent Instrument | |
| The electrical appliances have automatic switching furnace function, over-temperature alarm device | ||
| Auxiliary electrical appliance of the Control cabinet adopts domestic famous brand, Chint electric appliance. | ||
| Heating element | spiral resistance wire 0CR25A15 | |
| Air return barrel material | 4mm 304 stainless steel plate rolled into round barrel | |
| Windshield and fan blade material | 304 stainless steel plate | |
| Fan shaft material | Φ50 stainless steel 304 round steel | |
| Furnace cover | The upper layer with A3 board, the middle uses the fiber cotton, the lower layer uses 3mm201 stainless steel plate | |
| Furnace structure | Energy-saving refractory bricks and insulation cotton composition, insulation layer is not less than 300mm | |
| Temperature measuring element | Strong alkali-resistant stainless steel thermocouple K-degree number | |
| Hot air circulating fan | 1.5KW motor, fan blade diameter is not less than 380mm, centrifugal type | |
| Control cabinet size (L x W x H) | 1800x450x370mm | |
| Capacity | 150-200kg/furnace | |
1. Make response to customer's inquiry or requirement within 24 hours.
2. Assist customer to select the most suitable machine and give them our professional suggestion.
3. Produce machine by our experienced team according to customer requirement.
4. Provide customer operation manual or video for machine to help them operate machine more efficiently.
5. Provide customer layout of workshop with machine to help them install machine.
6. Assign engineer to assist customer to install machine.
7. Offer 2 year guarantee for our machines.
){kind=link}